The hand sanding is very common and is often essential in some very complex objects or difficult forms. For hand sanding sheets can use abrasives , abrasive sponges and steel wool . Choose the thickness of the sandpaper.

The rough sandpaper presents thicker grains. The grain size of the sandpaper used depends on the material to be sanded. There are various abrasive papers on the market: thick, intermediate and fine-grained. Furthermore, the choice of the sandpaper granulate is a function of the quality of the required finish. Thick sandpaper will give a rustic finish, while thin sandpaper will allow for a gentler polish.

The sandpaper coarse-grained , are used to start working on very rough surfaces, rusty or to remove the paint adhering, before the final sanding.

The intermediate sandpaper is effective for improving the finish of a previously treated surface with coarse sandpaper. Once the paint or rust has been removed, it is necessary to use medium grain sandpaper, which will soften the wood before the final treatment.

The fine sandpaper reaches a smooth finish on the surfaces. However, the use of a thicker sandpaper on rough areas is required, since to perform the work directly with a fine sandpaper, the task would be too difficult, would take too long and probably would not give the expected results. Ideally, you should start roughing the wood with a coarse sandpaper and finish it with fine-grained sandpaper.

TYPE OF GRAIN
The grain is the abrasive material that adheres to the sandpaper support. According to its composition it is possible to distinguish three types of grain:

– Silicon carbide : it is composed of a thin, angular, fragile and not very resistant grain. It is mainly used for sanding solid and tough materials such as: glass, cast iron, stone, marble, lacquer, ceramic, titanium, rubber, plastic, fiberglass, etc.

– Aluminum oxide (corundum): forms a round grain, without sharp edges, tough and long-lasting. It is suitable for sanding long chip materials, such as metal and wood. It is also suitable for smoothing plastered walls.

– Zirconium corundum : it is formed by a very uniform grain, quite tenacious and very long lasting. Thanks to its great tenacity, zirconium corundum is excellent for smoothing stainless steels.

It is also possible to distinguish sandpaper with open grain and closed grain . Open grains have fewer grains per unit area and are therefore less gravid. They are suitable for soft and resinous woods, paints, stuccos, plasters, wet or dead plasters, etc.

The grain number provides information on the grain size. The different grains are obtained by screening. The smaller the number of granules, the greater this, and therefore the coarser the sanding will be.